Gel motorcycle battery specs…
Gel filled batteries are commonly used in motorbike’s where the battery lays at an angle or flat.
Gel filled batteries are usually filled by the manufacturer before being shipped and start with the code CT (e.g. CT12B-4) or CTZ (e.g. CTZ10-S).
The 1st letter of the battery code is a manufacturers letter and can be different depending on the battery manufacturer (so YT12A-BS, CT12A-BS, GT12A-BS, DT12A-BS etc are all the same battery).
Gel batteries normally have black, dark blue or grey cases and are completely sealed when they are made (so there’s no cap that can be removed and they don’t need filling with acid).
Please note – The power outputs stated on this page will vary depending on the quality of the battery!
|Battery||Volts||Number of cells||Capacity (amps/hour)||Length (mm)||Width (mm)||Height (mm)||Weight (lb / kg)||Charging current (amp/hour)||Terminal layout||Cold cranking amps (CCA)|
|12||6||2.3||113||39||85||2.2 / 0.978||0.23||25|
|12||6||2.3||113||48||85||2.6 / 1.2||0.23||35|
|12||6||4||113||70||85||2.9 / 1.3||0.4||65|
|12||6||5||113||70||105||5.1 / 2.3||0.5||90|
|12||6||6||113||70||105||4.6 / 2.1||0.6||130|
|12||6||6.5||151||66||94||6 / 2.7||0.6||110|
|12||6||8||150||70||105||7.5 / 3.4||0.8||115|
|12||6||8.6||150||87||93||7 / 3.2||0.9||190|
|12||6||10||150||87||105||7.4 / 3.35||1||175|
|12||6||10||151||70||131||10 / 4.5||1||180|
|12||6||11||150||87||110||8.1 / 3.7||1.1||210|
|12||6||11.2||150||87||110||8.6 / 3.9||1.1||230|
|12||6||12||150||69||145||11 / 4.99||1.2||210|
|12||6||30||166||126||175||22 / 9.98||2.8||380|
The information provided on this page is ‘to the best of our knowledge’ and should not be taken as 100% accurate!!
To keep this page as a free resource for people to use, there are affiliate links (mainly Amazon) throughout the article. These affiliate links help maintain the cost of running this blog (basically, if you visit Amazon through one of the links and buy something, we make a few pence!).